1 - 1 of 1
Tru-Test : U-Test
Compact Ultrasonic Flaw Detector
Part: UT-NDTS-UTM1
Price:
Was: $4,950.00
Now: $4,450.00
 
Mfg Info More Detail Print

U-TEST

If you want to reduce the load on your back and your wallet - you need to look at the new UTEST- Mini.

The UT-Mini is powerful, handheld, full function ultrasonic flaw detector.

Bright, easy to see Color TFT Display

Extreme portability - Less than 3 pounds!

User friendly operating system.
 

Ideal for welding inspection and flaw detection where extreme portability is required.
 
Major Features:
  • Light weight - only 2.6 pounds (1.2 kg.) including batteries!
  • Easy to use operating system
  • digital trig functions
  • 0 - 1st Echo, Echo - Echo measurement
  • Two independent gates
  • Multi Curve DAC 
  • Color TFT display. A bright, 500 cd/m2 high contrast screen enables you to see the display and measurements in all lighting conditions.
  • Dustproof and shock resistant 
  • Store calibration parameters and inspection results with A-Scan and download to PC
  • Fast 60 Hz display update rate
  • Adjustable pulse repetition rate for testing thin or large test pieces and avoid phantom echoes.
Measurement Features:
  • High resolution color TFT display
  • Large thickness reading display
  • DAC curve with DAC alarm
  • +6dB DAC setting to extend DAC sound path up to 8 inches (200 mm) full screen
  • Positive, negative, and minimum depth alarms
  • Filled or hollow waveform trace display
  • Freeze and Peak and Reference Echo modes
  • Separately Gate A and Gate B settings
  • Echo-Echo for through coating thickness measurement
  • Peak or Flank Echo measurement
  • RF display
  • Timed B-Scan
  • Auto Probe Zero calibration
  • Pulse Repetition Rate Control
  • Standard Dual Gate with alarm
  • Fast 60Hz display update rate
  • Displays sound path leg and its value, surface distance and depth to flaw for angle beam inspection
 
Accessories (included):

  • Hard Carry case

  • 2 LiIon Batteries

  • External Battery Charger/Universal voltage AC adapter

  • USB/RS232 Data transfer cable

  • Operating manual (English)

  • Software for documentation and data filing  

  • 2 Cables
 
Specifications:
Calibration Range: 1 to 240 inches, 25 to 5000 mm steel longitudinal
Sound Velocity:
  • Fixed Steel Longitudinal (.233in/usec) and Shear (.127in/usec)
  • Adjustable : 0.039 to .394in/usec. (1000 to 9999m/sec, in 1usec steps
Probe delay: 0 to 365 usec
Gain:

  • Fine: 0.1 dB

  • 1/2/6/12/20 and user defined increments
Frequency Range:
  • Low: 0.5 to 4 MHz
  • High: 5 to 15 MHz
Pulse Repetition Frequency: 10 to 1,000 Hz
Test Methods: Pulse Echo and Through Transmission modes
Damping: 200 Ohms
Pulse Power: 200 and 400 volts
Echo Presentation: Full Wave and RF
Reject/Suppression: Linear 0 to 90% with LED indicator
DAC:
  • Two to Eight points
  •  40 dB Dynamic Range
  • 1, 3 or 4 curves
Data Storage: 1000 A-Scans Data Sets in flesh memory with alphanumeric identification and directory function
Units of measurement: Inch or mm
Direct documentation: Display, active measurement via RS-232 to PC
Interface: RS-232C (bidirectional) or USB adaptor to PC
Analog output; Proportional voltage for amplitude and sound path of the echo in the gate; TTL signal for gate alarm
Probe connector Two LEMO 00 connectors
Power supply: Removable 8800mAh/7.2V Li-ion Battery or mains supply via an external mains power/charger unit JBD15-A2S
Operating time: In excess of 8 hours from 2 supplied batteries. Charge status indicator on display
Temperature range: 23 to 131 degrees F. -5 to 55 degrees C.
Display size: 3.55 inches wide x 2.6 in high (90mm x 65mm)
Dimensions: 5 in. high x 7 wide x 2 in. thick (125mm x 180 mm x 50 mm)
Weight: 2.65 pounds (1.2 kg)

 

1 - 1 of 1

top